How to use the Smart Lock

A sign with this information can also be found on the fence near the lock. Diagram below.


WHEN YOU ARRIVE:

  1. Press any button on the keypad to wake the device up.
  2. Key in a valid access code then press the UNLOCK key. The status indicator will flash GREEN twice and sound 4 short beeps (ascending) once unlocked. See diagram below.
  3. If you have incorrectly entered the code the status indicator light will flash RED twice and sound 4 short beeps. Confirm the correct access code and try again. If you have partially entered the access code press the BACK ARROW button (bottom left) to reset, then try again.
  4. Pull out the shackle from the padlock to open. Leave the gate unlocked while you are playing.

 

WHEN YOU LEAVE:

Locking up is important to keep our club safe for our community!

When your session time is completed, and ONLY if there is no one else at the club, please follow these three steps:

  1. Please check the three side gates are locked internally.
  2. Please close the main gate behind you.
  3. Refit the smart lock on the gate and push the shackle back into lock until fully locked.

The lock will make a long beep sound, and the LED status indicator light above the keypad will flash GREEN for 2 seconds indicating the Smart Padlock is successfully locked.